Index

SEALERS &
Concrete Repair
Trojan Masonry Sealer: A penetrating polyester polymer and water-based polyurethane used to seal and waterproof all types of concrete slabs, walkways, driveways, brick and block walls, stucco and other types of cement such as ferro-cement, flying cement and shot-crete. It also prepares the surface for finish coatings such as our Exterior Elastomeric Wall Coating or acrylics and oil base paints.
Trojan Ultra Masonry Sealer: Our same great Trojan Masonry Sealer coupled with a tough water-base acrylic to create a penetrating sealer that also leaves a slight surface sheen.
Trojan Color Sealer: Color your concrete and seal in one easy step. The same great Trojan Masonry Sealer with pigment added to stain and seal at the same time.
Trojan Beta-Z Wood Sealer: Also a polyester polymer linked with a water-base acrylic sealer to seal wood surfaces prior to painting or other surface treatments.
Envirosafe Concrete pH Reducer: A liquid applied product that safely reduces the pH of new concrete so that coating and sealers may be applied without harming them.

CONCRETE REPAIR

Bondex 201 is an acrylic admixture for mixing with sand & cement for bonding cement repairs to the substrate. Not sticky when wet like other concrete glues for better workability and unequaled adhesion to substrates.

CLEANERS
NuLook Concrete Cleaner a fluid applied cleaner used to clean dirt, oil and grime off concrete, block, stucco, pavers and light color brick.
Rust Stain Remover a fluid applied cleaner that is used to removes stains, especially rust stains from concrete, brick, block and stucco.
Efflorescence Remover a liquid cleaner that is used to remove the white chalky salt deposits are carried to the surface by water that mar brick and block walls.
Easy Brick Cleaner is a liquid used to clean all types of brick, especially dark colored brick.
Red Clay Stain Remover is a liquid "must have" product for areas of the country where there is red clay that stains concrete, brick and stucco surfaces. Easy to apply.
Algae & Mildew Cleaner is a fluid applied cleaner that removes algae, mold and mildew from concrete and masonry surfaces quickly and retards the rapid re-growth. Easy to apply. Just spray on and pressure wash off.
Erase Cleaner is a environmentally safe cleaner that removes ink, graffiti, floor wax, carpet adhesive, paint and much more.
Enviro Clean Degreaser Concentrate is used to degrease tough oil and grease that has gotten into concrete.
EnviroClean 'Low Foam' Degreaser is an industrial strength cleaner and degreaser that unites safety, effective cleaning and a ‘low foam’ formula that is time-proven and job-tested. Can be diluted to use as a spray on and wipe off product.
Enviro Etch is a urea neutralized cleaner that is not corrosive to skin. It micro-etches and cleans the surface to prepare for Trojan Masonry Sealer and Trojan Color Sealers

These coatings and cleaners are safe enough for the home owner as well as strong and tough enough for the professional on all types of properties. Their ease of application and powerful ingredients "Get the Job Done" quickly and efficiently with little "down" time and are a safe alternative to harsh toxic products that pollute the environment.

COATINGS
Armor Coat Clear: A clear acrylic sealer that gives a lasting gloss to surfaces and provides protection against weathering and wear.
Elastomeric Exterior Wall Coating is a 100% acrylic coating (not a thin Paint) that can be applied over brick, block, concrete, metal or wood. Protects against wind-driven rain. It bridges cracks and small holes.

Resflex Color Shingle Coating is a thick and creamy 100% acrylic coating seal and protect asphalt shingles
Clear Armor Coat for Wood: A water-base100% acrylic designed to seal wood.