EnviroClean ‘Low Foam’ is an industrial strength
cleaner and degreaser that unites safety, effective cleaning and a ‘low foam’
formula that is time-proven and job-tested. Can be diluted to use as a spray on
and wipe off product.
APPLICATION
INSTRUCTIONS:
NORMAL
CLEANING: Dilute concentrate 10:1 or 15:1 as needed. Spray on, let stand 1-3
minutes, agitate severe spots. A thorough rinse should follow. SUGGESTED
USES: Any place that needs thorough cleaning and degreasing around the home,
office buildings or commercial buildings.
HEAVY
CLEANING: Use full strength or dilute 1:1 as needed.
Spray on, let stand 1-3 minutes. Agitate severe spots. A thorough rinse should
follow. SUGGESTED USES: Ramps, decks, platforms
Engine rooms, engine parts,
bulkheads, oil-stained concrete, barge compartments, and fireplace carbon and
soot, stripping wax, oil drilling platforms, etc.
EXTRA HEAVY CLEANING: Scrape off
extremely heavy grease build-up. Spray on, let stand 3-5 minutes. Agitate severe
spots. Repeat as needed until area is clean. SUGGESTED USES: Holding
tanks, engines and engine rooms, garage repair stalls, grease traps, etc.
STEAM CLEANING OR PRESSURE WASH: A premixed solution can be drawn from
auxiliary tube or put directly into mixing tank giving up to 1:200 dilution at
the nozzle. SUGGESTED USES: Steam cleaning, hot or cold pressure washing.
DILUTION TABLE
USES: ENVIRO-CLEAN WATER
NORMAL CLEANING 1
PART 10 TO 20
HEAVY DUTY CLEANING 1 PART 5 TO 10
EXTRA HEAVY CLEANING 1 PART 1 TO 5
STEAM CLEAN OR PRESSURE 1 PART 5 TO 100

These files are available in PDF Format
Enviro Clean 'Low Foam' is available in:
1-Gallon Bottles
5-Gallon Pails
55-Gallon Drums