|
Envirosafe is
a manufacturer of environmentally safe concrete and masonry cleaners, sealers,
degreasers, and coatings. These products are safe, effective and
"They
Get the Job Done!"
Envirosafe
Manufacturing uses state-of-the-art ingredients for the formulating
of our concrete and masonry sealers, rust and stain removers for concrete,
efflorescence removers, brick cleaners and our coatings for concrete.
Our
products are proudly MADE IN THE USA!
WE SHIP via DHL or Truck Line
If you
would like to discuss your project or need help estimating the quantity
that you need, you may call Envirosafe (West Coast) Toll Free at
(800) 800-5737 or call our sister company Eco-Wares, Inc.
(East Coast) Toll Free at (866) 874-8070 for a free
consultation.
CLEANERS
NuLook
Concrete Cleaner
is
used to deep clean concrete, block, stucco and light color brick. It then
can be sealed or painted.
Rust
Stain Remover
is
used to remove stubborn rust stains from concrete, brick, block and
stucco.
Efflorescence
Remover
is
used to remove the white efflorescence deposits that mar brick and block
walls.
Easy
Brick Cleaner
is
used to clean all types of brick, especially dark colored brick.
Red
Clay Stain Remover
is
a "must have" product for areas of the country where there is
red clay that stains concrete, brick and stucco surfaces. Easy to
apply.
Algae
& Mildew Cleaner
is a fluid
applied cleaner that removes algae, mold and mildew from concrete and
masonry surfaces quickly and retards the rapid re-growth. Easy to apply.
Just spray on and pressure wash off.
Erase Cleaner
is a environmentally
safe cleaner that removes ink, graffiti, floor wax, carpet adhesive, paint and
much more.
Enviro
Clean Degreaser Concentrate
is
used to degrease tough oil and grease that has gotten into concrete.
EnviroClean 'Low Foam' Degreaser
is an
industrial strength cleaner and degreaser that unites safety, effective cleaning
and a ‘low foam’ formula that is time-proven and job-tested. Can be diluted to
use as a spray on and wipe off product.
SEALERS
Trojan
Masonry Sealer:
A penetrating polyester polymer and
water-based polyurethane used to
seal and waterproof all types of concrete slabs, walkways, driveways,
brick and block walls, stucco and other types of cement such as ferro-cement, flying cement and shot-crete. It also prepares the
surface for finish coatings such as our
Exterior Elastomeric Wall Coating
or acrylics and oil base paints.
Trojan Ultra Masonry Sealer:
Our same great
Trojan Masonry Sealer
coupled with a tough water-base acrylic to create a penetrating sealer
that also leaves a slight surface sheen.
Trojan Color Sealer:
Color your concrete and seal in one easy step. The same great
Trojan Masonry Sealer
with pigment added to stain and seal at the same time.
Trojan Beta-Z Wood Sealer:
Also a polyester polymer linked with a water-base acrylic sealer to seal
wood surfaces prior to painting or other surface treatments.
Armor Coat Clear:
A clear acrylic sealer that gives a lasting gloss to surfaces and provides
protection against weathering and wear.
Envirosafe Concrete pH Reducer:
A liquid applied product that safely reduces the pH of new concrete so that
coating and sealers may be applied without harming them.
COATINGS
Elastomeric Exterior Wall Coating
is
a 100% acrylic coating (not a thin Paint) that can be applied over
brick, block, concrete, metal or wood. Protects against wind-driven rain.
It bridges cracks and small holes.
Resflex
Roof Coating
is
a 100% acrylic roof coating that can be applied to many types of roofs. It
is Ultra white to reflect UV and heat.
CONCRETE REPAIR
Bondex
201
is
an acrylic admixture for mixing with sand & cement for bonding
cement repairs to the substrate. Not sticky when wet like other concrete
glues for better workability and unequaled adhesion to substrates.
These coatings
and cleaners are safe enough for the home owner as well as strong and tough
enough for the professional on all types of properties. Their ease of
application and powerful ingredients "Get the Job Done" quickly and efficiently
with little "down" time and are a safe alternative to harsh toxic products that
pollute the environment.
Envirosafe
Manufacturing Corp.
East Coast Plant: 7634-B Progress Circle
West Coast Plant: 817 Benton Way
W.
Melbourne
,
FL
32904
Wenatchee, WA 98801
(321) 733-0703
(509) 663-4164

|